Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

MSA1000 not showing new drives

fbadmin
Occasional Contributor

MSA1000 not showing new drives

WE have a MSA1000 with 2 san bays. we added 4 300gb drives to san bay 2. When i type "show disks" it showed all 4 drives. after raiding 2 of the 4 drives and tried to raid the second pair but was unable to stating that they didnt have enough space. When i pulled the drives out to reseed them is when i ran into the msa not showing the drives anymore.

Anybody have any ideas why after i reseeded the drives that neither controller 1 or 2 will show the drives? is their a command to rescan the drives that i dont know about?
1 REPLY
fbadmin
Occasional Contributor

Re: MSA1000 not showing new drives

we couldnt figure it out but instead we rremoved the raid from the first 2 drives. once we did that it showed all 4 drives again. WE then raided the 2 drives that didnt show up before first then the other 2 and all is good.