HPE Community
Disk Enclosures
1752782 Members
6190 Online
108789 Solutions
New Discussion

MSA1500 Disk failure

 
SOLVED
Go to solution
Timo Steylen
Advisor

‎10-20-2008 12:27 AM

‎10-20-2008 12:27 AM

MSA1500 Disk failure

If a disk failure take place, the msa1500 rebuild on the hot spare. But how does the msa work if you replace the failed disk? Will it rebuild again on the new disk? Or do i need to make the replaced disk the new hotspare?

thanks
0 Kudos
Reply
1 REPLY 1
IBaltay
Honored Contributor

‎10-20-2008 01:37 AM

‎10-20-2008 01:37 AM

Solution

Re: MSA1500 Disk failure

Hi,
When there is a disk failure,
a) wait for the rebuilt to the spare drive first
b) after the rebuilt completion replace the failed drive
c) the system will automaticaly rebuild the replacement hard drive and reset the spare HDD to an available state
the pain is one part of the reality
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.