Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

MSA1500 SSP showing old/replaced HBA

SOLVED
Go to solution
IvanForceville
Regular Advisor

MSA1500 SSP showing old/replaced HBA

Dear,

We have an 4xHP Proliants (DL380G4 & DL585G2) connected through redundant san switches on an MSA1500.

One of the HBA's on the DL585G2 became defective and was replaced.
The WWN of the new HBA showed up in SSP and I gave it access to LUN4.

The old WWN of the previous HBA is still showing in SSP. How can I remove this WWN from the system? It's the "Uknown" one in the screenshot.


3 REPLIES

Re: MSA1500 SSP showing old/replaced HBA

I also have this problem. Did you ever resolve it?
John Kufrovich
Honored Contributor
Solution

Re: MSA1500 SSP showing old/replaced HBA

Just go into SSP,
Name the SSP, "Unknown" and Profile = "default". click save.

Matthew Mitchell
Occasional Visitor

Re: MSA1500 SSP showing old/replaced HBA

You must use the Console Cable for the MSA and then use the following command:

delete connection