Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

MSA1500 & CLI & adding new connections

SOLVED
Go to solution
Brantley Fry
Occasional Contributor

MSA1500 & CLI & adding new connections

If I cable up a new host to the MSA (after zoning on the switch), will the MSA 'see' the new connection or do I have to reboot the MSA in order for it to pick it up. I only have CLI (not ACU-CLI) access to the MSA and the user guide is ambigious on whether the connection will show up automatically or if I need to reboot.
1 REPLY
Steven Clementi
Honored Contributor
Solution

Re: MSA1500 & CLI & adding new connections

The MSA should automatically see the new host. You will need to set the OS Type on the connection before the host can see any logical drives, depending on the firmware of th MSA.


Steven
Steven Clementi
HP Master ASE, Storage and Clustering
MCSE (NT 4.0, W2K, W2K3)
VCP (ESX2, Vi3, vSphere4, vSphere5)
RHCE
NPP3 (Nutanix Platform Professional)