Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

MSA1500 / linux - 1 path not visable

inex
Super Advisor

MSA1500 / linux - 1 path not visable

Hi,

I have a MSA1500 with an active/passive code (5.02) and 2 san swicthes. I have several windows servers connected with mpio and both paths are visiable. Failover is working fine. Then I connect a linuex red hat ep-5 server with 2 FC1142SR hba's. Everything is zoned correctly in the switches, but I only see one hba in the MSA1500 acu. Tried to reboot server and san and it still does not work. Only the path which is on the active controller is working. Is it like this that I have to fail over the cobtroller to get the second controller visable in the acu?

Maybe I should upgrade to active / active code

-inex