Storage Boards Cleanup
To make it easier to find information about HPE Storage products and solutions, we are doing spring cleaning. This includes consolidation of some older boards, and a simpler structure that more accurately reflects how people use HPE Storage.
Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

MSA1500 with ESX 3.5 problems

Timo Steylen
Advisor

MSA1500 with ESX 3.5 problems

we have problems with a MSA1500 and 8 ESX (3.5) Servers.
The MSA1500 (firmware 7.0) locks up several times and some LUNs are realy realy slow... Also many scsi reservation errors are visible on ESX.

On the FC Switch if have set the port to fixed 2GB and fixed F-port..

Has someone seen the same problems? I heard something about HP no longer support ESX 3.5 on a MSA1500. Is this correct?
will downgrade ESX to 3.0.x solve the problem?

many thanks
3 REPLIES
Rob Leadbeater
Honored Contributor

Re: MSA1500 with ESX 3.5 problems

Hi,

According to VMware, ESX 3.5 is supported on an MSA1500.

http://www.vmware.com/pdf/vi35_san_guide.pdf

How are your LUNs arranged on the MSA ?

Cheers,

Rob
Steven Clementi
Honored Contributor

Re: MSA1500 with ESX 3.5 problems

MSA1500 with a minimum 7.00 firmware is supported with ESX 3.5.x. The recommended firmware is 7.10.

1. Check your connection types on the MSA with the ACU.

2. Reseat the transceiver kits on your SAn Switches

3. What type of servers and hba do you have? (Make/model/etc)

4. You should not need to downgrade.


Steven
Steven Clementi
HP Master ASE, Storage and Clustering
MCSE (NT 4.0, W2K, W2K3)
VCP (ESX2, Vi3, vSphere4, vSphere5)
RHCE
NPP3 (Nutanix Platform Professional)
Timo Steylen
Advisor

Re: MSA1500 with ESX 3.5 problems

the customer has the following hardware:
Server: blade BL20p
HBA: HP Emulex dual port FC

We have created more (9) arrays with serveral LUNs on each array (to minimize the load on each array and to load balancing on the two processors). This makes no difference...