HPE Community
Disk Enclosures
1752708 Members
5724 Online
108789 Solutions
New Discussion

Re: MSA2012i Hot Plug

 
Steve O'Brien_1
Occasional Contributor

‎12-06-2011 09:04 AM

‎12-06-2011 09:04 AM

MSA2012i Hot Plug

Hi,

 

We have a MSA2012i with 4 x drives and we're looking to fully populate it with an additional 8 drives.

 

Is the MSA2012i fully hot plug, i.e can the disks be inserted and then configured whilst the MSA is powered on or does it need to be powered down ?

 

Thanks,

 

Steve

 

0 Kudos
Reply
1 REPLY 1
Torsten.
Acclaimed Contributor

‎12-06-2011 10:06 PM

‎12-06-2011 10:06 PM

Re: MSA2012i Hot Plug

It must be up and running while inserting disks.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.