Storage Boards Cleanup
To make it easier to find information about HPE Storage products and solutions, we are doing spring cleaning. This includes consolidation of some older boards, and a simpler structure that more accurately reflects how people use HPE Storage.
Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

MSA30 smart array 6402 disk replace

SOLVED
Go to solution
tareq_2
Regular Advisor

MSA30 smart array 6402 disk replace

hi there
i have MSA30 smart array 6402 with three failed disk i want to replace this disks with new three disk. what i can do? is just plug it in the enclosure or i need to do something else
this MSA is connect to hpux in rp 7420 server.

any help please.
9 REPLIES
Torsten.
Acclaimed Contributor

Re: MSA30 smart array 6402 disk replace

Does

# sautil /dev/ciss...

really say all the disks are failed?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
tareq_2
Regular Advisor

Re: MSA30 smart array 6402 disk replace

hi Torsten
this is the output of the sautil
tareq_2
Regular Advisor

Re: MSA30 smart array 6402 disk replace

and this is the saconfig output
please find the attached file
Torsten.
Acclaimed Contributor
Solution

Re: MSA30 smart array 6402 disk replace

Looks like there is only 1 disk (ID 9) dead, but both batteries too.

You can just swap this disk.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
tareq_2
Regular Advisor

Re: MSA30 smart array 6402 disk replace

ok but i have three disk with red light what i do after i replace the disk , just put it .
or i need to run some command.
Torsten.
Acclaimed Contributor

Re: MSA30 smart array 6402 disk replace

According to the output you have 8 disks, 1 failed. What disks are red?

Just swap the disk (ID 9) and check again with sautil, the drive should be rebuilding.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
tareq_2
Regular Advisor

Re: MSA30 smart array 6402 disk replace

ok i will swap the faild disk with new one.
but what about batteries the both are faild.
what i can do for it . i think i need to update the firmware for the controller.
is that correct?
thank you for your help
Torsten.
Acclaimed Contributor

Re: MSA30 smart array 6402 disk replace

A failed battery is failed and need to be replaced. Checking the firmware is also a good idea ...

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
tareq_2
Regular Advisor

Re: MSA30 smart array 6402 disk replace

thanks for usefull help