Storage Boards Cleanup
To make it easier to find information about HPE Storage products and solutions, we are doing spring cleaning. This includes consolidation of some older boards, and a simpler structure that more accurately reflects how people use HPE Storage.
Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

MSA500 Error light

SOLVED
Go to solution
Andy Brown_3
Occasional Contributor

MSA500 Error light

The array had an overheat 407 error (by a room air con incident)on it followed by the 405 temperature OK state. The array still displays the orange system degraded light and it here a method of clearing it with out shutting the system down ?
3 REPLIES
Basil Vizgin
Honored Contributor
Solution

Re: MSA500 Error light

Press "up" button to see "407 error" again. By this you acknowledge this error. Then press "down" (or "left") to go back.
You can press "left" and "right" simultaneously to clear entire log.
Uwe Zessin
Honored Contributor

Re: MSA500 Error light

I have never tried it on an MSA500, but I guess it works the same way like the MSA1000:
use the buttons on the OPC to scroll through the messages - once all error messages have been shown, the red LED will go off unless the display shows an error message. You can delete messages (error or not) by pressing the LEFT and RIGHT buttons simultaneously.
.
Andy Brown_3
Occasional Contributor

Re: MSA500 Error light

Thanks guys for the replies will try that. Points assigned.