MSG80 PROBLEM

[Leandro Amarello]

MESSAGE AFTER POWER FAILER
DEVLOGS mirrorset DISK50200 D6
DISK60200
Switches:
POLICY (for replacement) = BEST_PERFORMANCE
COPY (priority) = NORMAL
READ_SOURCE = LEAST_BUSY
MEMBERSHIP = 2, 2 members present
State:
INOPERATIVE
DISK50200, no information available
DISK60200, no information available
Size: NOT YET KNOWN
No device installed: DISK50200 at PTL 5 2 0
No device installed: DISK60200 at PTL 6 2 0

[Uwe Zessin]

Looks like both disk died. However, I would try to reseat both and see if at least one member comes back that way.

[Leandro Amarello]

Thanks for your replay, how could i reset the disk

[Uwe Zessin]

I wrote "RESEAT", not "RESET".

- pull a disk drive by few centimeters until it loses power, but do not remove it from the bay
- wait a minute
- fully push it back into the bay