Storage Boards Cleanup
To make it easier to find information about HPE Storage products and solutions, we are doing spring cleaning. This includes consolidation of some older boards, and a simpler structure that more accurately reflects how people use HPE Storage.
Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

MSG80 PROBLEM

Leandro Amarello
Occasional Visitor

MSG80 PROBLEM

MESSAGE AFTER POWER FAILER
DEVLOGS mirrorset DISK50200 D6
DISK60200
Switches:
POLICY (for replacement) = BEST_PERFORMANCE
COPY (priority) = NORMAL
READ_SOURCE = LEAST_BUSY
MEMBERSHIP = 2, 2 members present
State:
INOPERATIVE
DISK50200, no information available
DISK60200, no information available
Size: NOT YET KNOWN
No device installed: DISK50200 at PTL 5 2 0
No device installed: DISK60200 at PTL 6 2 0
3 REPLIES
Uwe Zessin
Honored Contributor

Re: MSG80 PROBLEM

Looks like both disk died. However, I would try to reseat both and see if at least one member comes back that way.
.
Leandro Amarello
Occasional Visitor

Re: MSG80 PROBLEM

Thanks for your replay, how could i reset the disk
Uwe Zessin
Honored Contributor

Re: MSG80 PROBLEM

I wrote "RESEAT", not "RESET".

- pull a disk drive by few centimeters until it loses power, but do not remove it from the bay
- wait a minute
- fully push it back into the bay
.