Navisphere MIB or Fibre Alliance MIB

[Fred Henderson]

I'm receiving SNMP Traps from our Navisphere application that is connected to our EMC SAN. But I'm a hard time finding the actual MIB that is going to define the event.

Please see that atached file to see the Received Event

Fred.Henderson@t-netix.com

[James A. Donovan]

You can get the Fibre Alliance MIB from here.

http://www.fibrealliance.org/fb/mib_intro.htm

[Fred Henderson]

Jim,

Thanks for the Reply. I attempted to use the this site to get the MIB. But it appears that the MIB that I downloaded was a text file. I renamed the text file to MIB 2_2.mib. I attempted to load the mib. I got an error message.

"Error Detected while load MIB File: D|\program files\NNM\SNMP_MIBs\vendor..... This MIB Cannot be loaded until the following problem is corrected.

[FCMGMT-MIB] - Line 17: Error Defining Object:Found 'FcNameID'

Do you have any ideas on how to resolve this issue?

[James A. Donovan]

I'm afraid not. Here's an alternate source for the MIB. It's the 2.6 version not the 4.0.

http://h18000.www1.hp.com/products/storageworks/softwaredrivers/fcsanswitch816/mibv26.html

You should post your issue in the Openview NNM forum. You're likely to get a good answer there.

http://forums1.itrc.hp.com/service/forums/categoryhome.do?categoryId=165