Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

NetRaid-1M RAID0 to RAID1

Jorell Hernandez_1
Occasional Visitor

NetRaid-1M RAID0 to RAID1

I want to mirror an existing drive. The drive is 36gb and the new drive is also 36gb. The problem I am having is the existing drive shows up as 35072mb and the new drive is only 35002mb. Since is is smaller the Raid controller will not let me add the drive to the logical array. Is there a way to do this without moving the data off, wiping, recreating the mirror and putting the data back?