Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

NetRaid 4SI Issue on LH4

CORDIER
Occasional Advisor

NetRaid 4SI Issue on LH4

I've got an issue on a LH4 server after reboot.
The Netraid process stops at boot with error "adapter at baseport XXXX is not responding". Does anybody has encountered this issue. I stopped the server (switch off)during one minutes, then started again the server : The Netraid process ran with a Raid partition degarded but the OS booted normally. A disk was detected as failed.
1 REPLY
e4services
Honored Contributor

Re: NetRaid 4SI Issue on LH4

Sounds like you have a faulty controller
Hot Swap Hard Drives