Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

Nike 20 Array SP Question

SOLVED
Go to solution
Ken Martin_3
Regular Advisor

Nike 20 Array SP Question

OK so I went into FE mode to check complete configuration and event logs of SP's...

Had an SP that went into service mode (yellow led on) twice. Reseating the SP brought it back up.

Now I can't remember how to exit FE mode.

Any ideas?

Thanks
3 REPLIES
gsb_2
Regular Advisor
Solution

Re: Nike 20 Array SP Question

Isn't it control P USER?
Torsten.
Acclaimed Contributor

Re: Nike 20 Array SP Question

gsb is right.
CTRL p USER (upper case)

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Ken Martin_3
Regular Advisor

Re: Nike 20 Array SP Question


Exiting FE mode on a Nike 20 Array controller requires Control-P USER

This is when the 'SP' controller is
accessed via the serial port on the
back of the unit.