Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

No SCSI devices detected at boot.

Ayman Altounji
Valued Contributor

No SCSI devices detected at boot.

The motherboard of a Proliant 1600 was unstable. Tried to change the motherboard, and the result now is that the server gives the message "No SCSI devices detected" at boot. When running the diagnostic utility, it reports no problems with the disks. This is a 221 controller, with two 9,1 scsi drives in a mirror ( Raid 1 ). Tried to change back to the old motherboa rd, with no luck. The Motherboard is using the latest firmware.

I really appreciate any help, it is strongly needed :)
1 REPLY
Mark Cloutier
Respected Contributor

Re: No SCSI devices detected at boot.

If you are using the 221 to boot from then this is normal as nothing is attached to the on-board SCSI port. What you want to see is a Logical drive found message.
We are here for a good time, not a long time!