Storage Boards Cleanup
To make it easier to find information about HPE Storage products and solutions, we are doing spring cleaning. This includes consolidation of some older boards, and a simpler structure that more accurately reflects how people use HPE Storage.
Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

OVSAM 3.2 on the SMA III

SOLVED
Go to solution
Rocky_8
Regular Advisor

OVSAM 3.2 on the SMA III

Hi,

I installed SAM on the SMAIII.
I have a problem registering the service on the manage tools page.
I followd the same procedure as with version 3.1, but the SAM service states it is in ERROR state.
Is there any change in the way v3.2 registers itself on the SMA ?
Way of registration comes from the PDF "Installing/Using SAM on the SMA"

Any help is appreciated,

Rmk


5 REPLIES
Uwe Zessin
Honored Contributor
Solution

Re: OVSAM 3.2 on the SMA III

Hello Rocky,
I have successfully used the scripts with OVSAM 3.1 and 3.2. You know there are two different commands whether you have put the host agent on the SMA or not? The only problem I had was that a simple cut&paste from the PDF document did not work - I had to manually replace the '"' characters with their simple ASCII version. I'll attach my versions of the scripts so you can compare.

File: SAM-reg1.bat - run always
.
Uwe Zessin
Honored Contributor

Re: OVSAM 3.2 on the SMA III

File: SAM-reg2noHA.bat - run when host agent is not installed

(I have never really used this file, it's untested)
.
Uwe Zessin
Honored Contributor

Re: OVSAM 3.2 on the SMA III

File: SAM-reg2withHA.bat - run when host agent is installed
.
Rocky_8
Regular Advisor

Re: OVSAM 3.2 on the SMA III

Uwe,

Thanks, and i have tried it like with v3.1.
I will use your script files instead.

i'll give it a try right now

rmk,

Rocky_8
Regular Advisor

Re: OVSAM 3.2 on the SMA III

Uwe,

Thanks !

It worked, guess u were right with the copt paste issue.

Thanks again !

Rocky