Disk Enclosures
1748283 Members
4003 Online
108761 Solutions
New Discussion юеВ

Re: One HD on VA7110 not showing

 
Leahi
Frequent Advisor

One HD on VA7110 not showing

HPUX 11.11i
VA7110 with CVSDM

When I launch CVSDM gui and click on JBOD2 enclosure, disk #12 is black (blank, does not show along with the rest of the disks). There's no green circle which I can click on to check status.

When I check the physical enclosure in the server room, it has a green light like the others.

What does this mean?
3 REPLIES 3
Leahi
Frequent Advisor

Re: One HD on VA7110 not showing

When I execute
#armdsp -d
I get: Invalid FRU location
goldboy
Trusted Contributor

Re: One HD on VA7110 not showing

Leahi,
when you are in the Diagnostic Tab, what is the disk status ?
is that an existing disk that used to show up as an included disk ?

if so, the disk could have gone bad, if not some of these issues can be resolved by doing a soft restart.

Tal
"Life is what you make out of them!"
Leahi
Frequent Advisor

Re: One HD on VA7110 not showing

Yes, the disk was there before. Just noticed it wasn't listing in armdsp -a last month.

Will do a restart and see what happens.

Already re-seated disk. No joy.