Disk Enclosures
1748216 Members
3757 Online
108759 Solutions
New Discussion

P2000 G3 FC login problem

 
sfikr
Visitor

P2000 G3 FC login problem

Hello after few weeks with P2000 G3 FC dual controller I have trouble with login to MSU from browser (IE, FF). I always get ssl_error_bad_mac_alert message in web browser and cannot continue with login.

 

I tried to adjust NTP time, on/off port on switch where is management port connected but still without luck.

 

Do you have any ideas what going wrong?

 

KR,

 

Stepan

Stepan
2 REPLIES 2
Torsten.
Acclaimed Contributor

Re: P2000 G3 FC login problem

Could be a browser, certificate, time setting, firewall, etc ... problem.

What if you try another PC without a firewall (even local) between?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Johan Guldmyr
Honored Contributor

Re: P2000 G3 FC login problem

And if the problem is the same on another machine - could be that the management controller is not doing so well.
It can be restarted from the cli.