Storage Boards Cleanup
To make it easier to find information about HPE Storage products and solutions, we are doing spring cleaning. This includes consolidation of some older boards, and a simpler structure that more accurately reflects how people use HPE Storage.
Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

P2000 G3 SAS Multipath problem

madmax81
Occasional Contributor

P2000 G3 SAS Multipath problem

Hi!

 

I have a P2000 G3 SAS storage (2 controller configuration)with two DL 360 G8 servers (Set up with Windows Server 2012 Datacenter). The server's connect to the storage via  HP H221 HBA's and the volumes of the storage are shownn correctly on each server. The problem is, that as soon as I configure Multipathing with the command (mpclaim -n -i -a) one of the servers shows a bluescreen when executing the command or on the next restart. The error code is page_fault_in_nonpaged_area(lsi_sas2-sys). I already did a firmware update of the H221 and the P2000 controllers but it didn't help.

 

Can anybody help me?

 

Thank's in advance

 

Markus

2 REPLIES
StorageMike
HPE Pro

Re: P2000 G3 SAS Multipath problem

Hi Markus

 

Have you installed the following hotfix

 

http://support.microsoft.com/kb/2821052

 

Thanks

 

Michael

I work for HP

Click on the Kudos star if you think this post was useful :)
madmax81
Occasional Contributor

Re: P2000 G3 SAS Multipath problem

Hi!

 

I was able to fix the problem. I disabled the H221 controller in the bios and was then again able to boot the server. Then I installed all the Microsoft Updates and after installing an Optional Update the error was gone.

 

Regards

 

markus