Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

P400 Parity Initialization Status - Initialization Failed

Daniel_zp
Occasional Visitor

P400 Parity Initialization Status - Initialization Failed

Hello,

 

I had a power surge and had to replace 2 hard drives in RAID5 array.

After deleting, recreating and rebuilding logical drive, there is no warnings/errors in ACU, but it says:

 

Parity Initialization Status - Initialization Failed

 

 

I've attached a screenshot

http://i.imgur.com/OtLaB3U.png

and ADU report

https://www.dropbox.com/s/h0mur26cqhc8ury/report-408c22a1-00000b14-00000000.zip

 

 

What could cause this? Should I be very worried? And how can I fix this?

 

Thank you in advance.

1 REPLY
AnkitM
Trusted Contributor

Re: P400 Parity Initialization Status - Initialization Failed

Drive  2I:1:3 and  2I:1:4 multiple instances of Medium Error (0x03) which could be one of the reason for the Logical Drive initilization failure as I see Controller Firmware is up to date and I was unable to find any other errors on a quick glance.

 

You may contact HP Technical Support to get the disk replaced, if you have a valid entitlement.

 

 

Was your question answered correctly? If so, please remember to mark your question Answered when you get the correct answer and award KUDOS! to the person providing the answer. This helps others searching for a similar issue.