P410 with RAID 1, Recovery does not start, please help

[sintom]

Dear all

We have a P410 with RAID 1 in a DL 160G6 and Recovery will not start.

The reason seems to be that array A has physical drives  "0:1" and "1I:1:2" assigned.

But it should be physical drives "1I:1:1" and "1I:1:2". The correct replacement drive ""1I:1:1"" is currently listed as unassigned.

Can you please help? Details of hpacucli are below.

Thanks a lot.

=> ctrl slot=4 ld all show detail

Smart Array P410 in Slot 4

   array A (Failed)

      Logical Drive: 1
         Size: 232.9 GB
         Fault Tolerance: RAID 1
         Heads: 255
         Sectors Per Track: 32
         Cylinders: 59844
         Stripe Size: 128 KB
         Status: Interim Recovery Mode
         Unique Identifier: 600508B100105239535847354B460100
         Disk Name: /dev/cciss/c0d0
         Mount Points: /boot 476 MB
         Logical Drive Label: A056F251PACCR9SXG5KF34EC
         Mirror Group 0:
            physicaldrive 1I:1:2 (port 1I:box 1:bay 2, SATA, 250 GB, OK)
         Mirror Group 1:
            physicaldrive 0:1 (box 0:bay 1, SATA, 0 MB, Failed)

=> ctrl slot=4 pd all show detail

Smart Array P410 in Slot 4

   array A (Failed)

      physicaldrive 0:1
         Box: 0
         Bay: 1
         Status: Failed
         Drive Type: Data Drive
         Interface Type: SATA
         Size: 0 MB
         SATA NCQ Capable: False
      physicaldrive 1I:1:2
         Port: 1I
         Box: 1
         Bay: 2
         Status: OK
         Drive Type: Data Drive
         Interface Type: SATA
         Size: 250 GB
         Firmware Revision: HPG6
         Serial Number: 9SF10CDY
         Model: ATA     GB0250EAFJF
         SATA NCQ Capable: True
         SATA NCQ Enabled: True
         PHY Count: 1
         PHY Transfer Rate: 3.0GBPS

   unassigned

      physicaldrive 1I:1:1
         Port: 1I
         Box: 1
         Bay: 1
         Status: OK
         Drive Type: Unassigned Drive
         Interface Type: SATA
         Size: 250 GB
         Firmware Revision: HPG0
         Serial Number: Z2A96Q91
         Model: ATA     VB0250EAVER
         SATA NCQ Capable: True
         SATA NCQ Enabled: True
         PHY Count: 1
         PHY Transfer Rate: 3.0GBPS