Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

Performance Advisor XP not showing new LUNs

paul broadway
Occasional Contributor

Performance Advisor XP not showing new LUNs

We are using Performance Advisor XP to monitor our XP256. I have added new LUNs to one of the connected n-class servers, using a different port than the other devices connected to this server.
The new LUNs/port are not showing up on Performance Advisor. Is there something that I need to do to make PAXP rescan for these new disks?
1 REPLY
Xin Chen_1
Occasional Advisor

Re: Performance Advisor XP not showing new LUNs

Hi, Nigel

Every time you change the configuration of the XP (eg. adding new luns, changing paths, etc) or changing the LVM configuration (eg. adding new VGs, changing the pvs, etc), you need to notify Performance Advisor. You can do this by clicking the "Configuration" tab, then selecting the host on which you have changed the configuration (you can select multiple hosts), then clicking the "Request Info" button (you will see a '*' in the Mod field) and the "Submit" button. After you do this, you should be able to see the new luns in PA.

Good luck!