Disk Enclosures
1748089 Members
4813 Online
108758 Solutions
New Discussion

Re: Problem EVA 4400 and rp3440 11.11

 
bernd-007
Occasional Contributor

Problem EVA 4400 and rp3440 11.11

Hello together

 

I have to connect an EVA 4400 to an rp3440 server running HP-UX 11.11 Patch Level Dec 2006. It is a reference string for our customer. The golden image was frozen.

 

ioscan

...

Adapter (FC Port 1)
0/2/1/0.1                   fcp                      FCP Domain
0/2/1/0.1.0.0.0                              ext_bus         FCP Array Interface
0/2/1/0.1.0.0.0.0                               target       
0/2/1/0.1.0.0.0.0.0                                ctl       HP      HSV300
0/2/1/0.1.0.255.0                            ext_bus         FCP Device Interface
0/2/1/0.1.0.255.0.0                             target       
0/2/1/0.1.0.255.0.0.0                              ctl       HP      HSV300
0/2/1/0.1.1.0.0                              ext_bus         FCP Array Interface
0/2/1/0.1.1.0.0.0                               target       
0/2/1/0.1.1.0.0.0.0                                ctl       HP      HSV300
0/2/1/0.1.1.255.0                            ext_bus         FCP Device Interface
0/2/1/0.1.1.255.0.0                             target       
0/2/1/0.1.1.255.0.0.0                              ctl       HP      HSV300
...

 

I created to virtual disks on the EVA and presented them to the server. But on the server I do not see any disk. I rebooted the maschine several times.

 

Any ideas?

 

Regards

 

Bernd

4 REPLIES 4
Torsten.
Acclaimed Contributor

Re: Problem EVA 4400 and rp3440 11.11

Did you set the host mode to hp-ux during presentation (default would be wrong)?


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
bernd-007
Occasional Contributor

Re: Problem EVA 4400 and rp3440 11.11

Of course. My 11.11 Server is declared as a HP-UX server.

 

Thx

 

Bernd

Torsten.
Acclaimed Contributor

Re: Problem EVA 4400 and rp3440 11.11

Zoning must be OK, because the controllers are visible.

The "255" in the path looks a bit strange.

 

 

However, it could cause problems if you delete a LUN and present a new LUN with the same LUN number.

 

Look into the syslog after running ioscan and double check the LUN presentation.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
bernd-007
Occasional Contributor

Re: Problem EVA 4400 and rp3440 11.11

I deleted the LUNs and created new once with other LUN numbers. I did an ioscan with no results and checked the syslog: No entries.

 

I reboot the maschine and nothing new. I do not see the LUNs.

 

Do I need more software or patches? I use the AB378 FC controller and I installed the latest driver.

 

Thx

 

Bernd