Disk Enclosures
1748182 Members
3448 Online
108759 Solutions
New Discussion юеВ

Re: Problem Installing EVA4400 Command View on RX6600 as Management Server

 

Re: Problem Installing EVA4400 Command View on RX6600 as Management Server

Hi Patrick & Mark..

I've updated the firmware (ABM.pkg) & Now, There is option for Launch Command View EVA using Management module server..

But, when I'm logging in, The page can not be displayed properly, There is no any picture under the page ..

My Java JRE already on version 1.5.06 & My Internet Explorer v7.0..
I've already also restart my IE & Notebook, but the result still same..

Any advise...?

Thanks
Piyadassi
hpite
Frequent Advisor

Re: Problem Installing EVA4400 Command View on RX6600 as Management Server

Hi Pivadassi,

just to make sure, can you type https://:2372 into IE?

Re: Problem Installing EVA4400 Command View on RX6600 as Management Server

Hi..

Yes, https://default IP WOCP:2372

The problem is minimal XCS Controller Firmware for ABM is 09005000 or 09006000.

I've updated the Management Module Firmware that already supported ABM, but I still can not access EVA Command View because My existing XCS Firmware is 09001000.

As I know, Upgrade XCS Firmware is through EVA Command View right..?
Right now I can not access my Command View :)

So any advise...?

Thanks
Piyadassi
Patrick Terlisten
Honored Contributor

Re: Problem Installing EVA4400 Command View on RX6600 as Management Server

Hello,

install a x64 server with windows server 2003, install CV and update the XCS. Have you read the prerequisites before upgrading the ABM?

Best regards,
Patrick
Best regards,
Patrick

Re: Problem Installing EVA4400 Command View on RX6600 as Management Server

Hi Patrick..

Right now, I only have 1 server RX6600, EVA4400 & My notebook..

If I can get the x64 server, then I will use it as a Management Server. I'll not use ABM..

So, Is there another option or not..?

Many thanks ya...
Piyadassi
hpite
Frequent Advisor

Re: Problem Installing EVA4400 Command View on RX6600 as Management Server

Hi Pivadasi,

here's one idea to try without using an X86 server.

1. Run SSSU utility from your notebook and point to the WOCP ip address (Manager).
2. Login and use the CODELOAD command to upload the .sss file for XCS 09501100 version (that's the latest released version)

You can get the .sss file from the software depot. If you are not familiar with the SSSU utility, download the SSSU reference.

Hope this helps.
Patrick Terlisten
Honored Contributor

Re: Problem Installing EVA4400 Command View on RX6600 as Management Server

Hi Piya,

there is no other way:

- x86/x64 with command view
- Array based management with CV on the management processor

No other way to manage the array.

Best regards,
Patrick
Best regards,
Patrick

Re: Problem Installing EVA4400 Command View on RX6600 as Management Server

Guys..

Thanks for ur all support..

It's done..

Thx a lot..