HPE Community
Disk Enclosures
1752794 Members
6433 Online
108789 Solutions
New Discussion юеВ

Re: Problems with win 2000 and Raid Array 4000

 
Juan Carlos_4
New Member

тАО03-27-2003 08:06 AM

тАО03-27-2003 08:06 AM

Problems with win 2000 and Raid Array 4000

I have a problem with a compaq proliant PL 1600 server. It's a cluster and it has got a Raid Array 4000. When we try to install windows 2000 advanced server, the system cannot know the Array. I haven't got a driver for windows 2000 for the array controller.

Thanks and excuse me for may bad English
0 Kudos
Reply
2 REPLIES 2
Mike_392
Occasional Contributor

тАО04-08-2003 04:04 AM

тАО04-08-2003 04:04 AM

Re: Problems with win 2000 and Raid Array 4000

Verify that the HBAs are supported by CPQ/HP, verify that the HBA driver is the most recent (5.20.0.32), and also verify fibre connectivity to the hub/switch, RA4000, and nodes.
0 Kudos
Reply
Terry Hutchings
Honored Contributor

тАО04-08-2003 09:31 AM

тАО04-08-2003 09:31 AM

Re: Problems with win 2000 and Raid Array 4000

The storage is not seen even after installing the latest Support Pack? Do you have good link lights on the Arbitrated loop? This would normally use the cpqfcalm.sys driver.
The truth is out there, but I forgot the URL..
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.