Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

Problems with win 2000 and Raid Array 4000

Juan Carlos_4
Occasional Visitor

Problems with win 2000 and Raid Array 4000

I have a problem with a compaq proliant PL 1600 server. It's a cluster and it has got a Raid Array 4000. When we try to install windows 2000 advanced server, the system cannot know the Array. I haven't got a driver for windows 2000 for the array controller.

Thanks and excuse me for may bad English
2 REPLIES
Mike_392
Occasional Contributor

Re: Problems with win 2000 and Raid Array 4000

Verify that the HBAs are supported by CPQ/HP, verify that the HBA driver is the most recent (5.20.0.32), and also verify fibre connectivity to the hub/switch, RA4000, and nodes.
Terry Hutchings
Honored Contributor

Re: Problems with win 2000 and Raid Array 4000

The storage is not seen even after installing the latest Support Pack? Do you have good link lights on the Arbitrated loop? This would normally use the cpqfcalm.sys driver.
The truth is out there, but I forgot the URL..