Storage Boards Cleanup
To make it easier to find information about HPE Storage products and solutions, we are doing spring cleaning. This includes consolidation of some older boards, and a simpler structure that more accurately reflects how people use HPE Storage.
Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

Procedure without amplification enclousure stop EVA4000 disk

SOLVED
Go to solution
JuanCG
Super Advisor

Procedure without amplification enclousure stop EVA4000 disk

Hello everyone, I have an EVA4000 and I need to add a Enclousure Disk without having to stop the EVA.
I can indicate is the correct procedure? I have very critical data.

Is there documentation for this?
I thought that the procedure is as follows:
1. Put the tray and give it new power
2. Connect the EMU in the new tray
3. I break a loop and connect with the new tray and then the following

Is this correct?

Thank you very much
4 REPLIES
IBaltay
Honored Contributor
Solution

Re: Procedure without amplification enclousure stop EVA4000 disk

Víctor Cespón
Honored Contributor

Re: Procedure without amplification enclousure stop EVA4000 disk

This document should come with the enclosure, but in case you don't have it, I attach it:
JuanCG
Super Advisor

Re: Procedure without amplification enclousure stop EVA4000 disk

Thank you very much, the document is clear.

My question was the order of connection of the EMU and see what that last link.

Greetings
JuanCG
Super Advisor

Re: Procedure without amplification enclousure stop EVA4000 disk

Thank you