Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

Proliant 5500 and smart array 3200 Post error 177

Proliant 5500 and smart array 3200 Post error 177

Hello,
I have a Proliant 5500 with smart array 3200
When i reboot the server , the bios smart array is stopped and indicates
POST Error 177 Configuration Not Complete Controller Order Not Setup
which modification must I make

Thank you for your assistance

7 REPLIES
Andrzej Kowalik
Honored Contributor

Re: Proliant 5500 and smart array 3200 Post error 177

Press F10 to enter to utility partition and via view or modify computer settings set boot and controller order.
regards,
Andrzej

Re: Proliant 5500 and smart array 3200 Post error 177

Hello

When I press F10 i got the message
The System Partition Utilities are not available on this system
Press return key to continue
and NT4 run good

I can't enter in the Bios of the server

which key to press to enter the bios

Thank You
Andrzej Kowalik
Honored Contributor

Re: Proliant 5500 and smart array 3200 Post error 177

You have to create first System Partition Utility. You can do this with Compaq SmartStart CD 5.50 or earlier. If you have more time and are not nervous, you can create set of diskettes (server start) and boot server from this set.
regards,
Andrzej

Re: Proliant 5500 and smart array 3200 Post error 177

My server is in production
OS NT4 SP6
I can not boot on the smartstart 5.50
Andrzej Kowalik
Honored Contributor

Re: Proliant 5500 and smart array 3200 Post error 177

Use smartstart that cam with your server - i think that was 4.23A to 4.70
regards,
Andrzej

Re: Proliant 5500 and smart array 3200 Post error 177

Hello
I can boot on Smart Start 5.50, but the server is in production
which key makes it possible to enter the bios system and the bios smart array 3200
Thank You

Re: Proliant 5500 and smart array 3200 Post error 177

It's OK
Boot on smartstart 5.50
enter in the config
boot order OK
save the conf