Disk Enclosures
1748121 Members
3274 Online
108758 Solutions
New Discussion юеВ

Re: Question about MSA 2012i

 
SOLVED
Go to solution
Hugo Sepulveda Reyes
Occasional Contributor

Question about MSA 2012i

Can I connect two server to one MSA2012i without switch between them (servers and storage)? How?
5 REPLIES 5
Uwe Zessin
Honored Contributor
Solution

Re: Question about MSA 2012i

Direct connect is not supported on the MSA2012i.
.
Hugo Sepulveda Reyes
Occasional Contributor

Re: Question about MSA 2012i

Can you explain me why?

I read the documentation and I concluded the same as you. I didn't build the instalation, I'm trying to validate it.

So, I'm try to understand why the technical personal made that.

More clues: the storage has two controllers. One of the servers can "see" the LUN, but the other one cannot.
Uwe Zessin
Honored Contributor

Re: Question about MSA 2012i

No I can't. I did not set up the rules and did not ask why, but this week I've heard it 2 times from HP.

"Not supported" does not always mean: "this does not work". Maybe it is not supported because nobody at HP has tested it. Maybe a strange problem was detected and it was decided that the market is too small to work on analysis, fixing and requalification.
.
Hugo Sepulveda Reyes
Occasional Contributor

Re: Question about MSA 2012i

Ok. Thanks Uwe.
Hugo Sepulveda Reyes
Occasional Contributor

Re: Question about MSA 2012i

Thanks!!!