HPE Community
Disk Enclosures
1753835 Members
7944 Online
108806 Solutions
New Discussion

RA4000 firmware update

 
Ingo Flaschberger
Occasional Contributor

‎03-01-2006 07:09 AM

‎03-01-2006 07:09 AM

RA4000 firmware update

hello,

I'm trying to install a the 2.60 firmware to a RA4000 array controller. As FC-card I used a HP HHBA-5101C 64bit pci card, but the firmware update disk does not find any RA4000 arrays.

What fc-card should I use?

I'm going to write a driver for the RA4x00 arrays for linux kernel 2.6 because the cpqfc driver or the HHBA-5101c tachyon chipset it out from the kernel. This fc-card driver also included some special code for the RA4x00 arrays which are currently broken with linux 2.6.

0 Kudos
1 REPLY 1
Ingo Flaschberger
Occasional Contributor

‎03-01-2006 07:12 AM

‎03-01-2006 07:12 AM

Re: RA4000 firmware update

double post
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.