Storage Boards Cleanup
To make it easier to find information about HPE Storage products and solutions, we are doing spring cleaning. This includes consolidation of some older boards, and a simpler structure that more accurately reflects how people use HPE Storage.
Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

RAID 5 to RAID 0

Eduardo Marques_1
Occasional Contributor

RAID 5 to RAID 0

Hi,

we are rellocating an HP-UX server and we have already removed all LV's and VG's from a RAID5, unbound the LUN's. But we've been unable to use this disks as a RAID0, or even 'individual disks'. SAM shows only RAID0/1,RAID3,RAID5 and "spare" options when we try to bind a new LUN. It's a "Model 34" Array Controler, and HP-UX is 11.00. By the way, we tried to use "stm" to bind the new LUN's, but Expert Tool is disabled.

Thanks,
Eduardo.
1 REPLY
Jeff Schussele
Honored Contributor

Re: RAID 5 to RAID 0

Hi Eduardo,

Try running the following
arraydsp array_id
If that returns info about your array, then the commands you need to use are located in /opt/hparray/bin & you'll be using
arraycfg
arrayfmt
arraymgr
etc.

HTH,
Jeff
PERSEVERANCE -- Remember, whatever does not kill you only makes you stronger!