cancel
Showing results for 
Search instead for 
Did you mean: 

RAID Level

Donna Walker
Occasional Contributor

RAID Level

Hi, I have an N-Class with HP-UX 11.0. I have a disk array but don't know which RAID level is deployed. Is there a simple way to determine which level is running?

Thanks for your help in advance.
Donna
2 REPLIES
Shaikh Imran
Honored Contributor

Re: RAID Level

Hi,
What is the disk array model ?
Anyways i think
This command should be able to tell you
#amdsp -a
( see man amsdsp )
OR
Also Try to see from SAM
Not tried but you can try to get the information from STM...see if you can get something.

Regards,


I'll sleep when i am dead.
Donna Walker
Occasional Contributor

Re: RAID Level

I was not successful in executing the command amdsp on my system so I submitted a support case. They told me to use arraydsp and with that (and option -a) I was able to determine my RAID level.

Thanks for your help anyway.
Donna