RAID

[Eniac]

Hi,

I have issue with a ML350 G3.
There are 3 hardrives configured with RAID 5 and 2 other hardrives configured with RAID 1.

two hardrives with raid 5 config is faulty now,but the funny thing is that they failed at the same time. could this issue be with the scsi card? i dont think its the hardisks,however not sure. Please help on diagnisis steps

[Patrick Terlisten]

Hello,

shutdown the server and transfer the disks into another server. Be sure that the new server is alos powered off, when you plugin the disks. If the RAID 5 came up on this server, maybe the backplane or controller is the problem. You can also run the array diagnostic utility (ADU) on the ML350 G3.

Best regards,
Patrick