Storage Boards Cleanup
To make it easier to find information about HPE Storage products and solutions, we are doing spring cleaning. This includes consolidation of some older boards, and a simpler structure that more accurately reflects how people use HPE Storage.
Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

RAID160 SA Ultra160 SCSI Controller with RP4440 Server.

SOLVED
Go to solution
Emad Omar
Regular Advisor

RAID160 SA Ultra160 SCSI Controller with RP4440 Server.

Hi. I have an Ultra160 SCSI Controller on RP4440 Server and need to configure the RAID Level from this Server. The O.S. is HP-UX 11i v1 . The Server is attached to an External Storage MSA30 SB via this SCSI Controller.
1 REPLY
Ron Lawson_1
Trusted Contributor
Solution

Re: RAID160 SA Ultra160 SCSI Controller with RP4440 Server.

Hi Emad,

You didn't say whether you plan to boot over the RAID controller. Assuming you don't need to boot over it, the simple answer is you need to run the "saconfig" command from HP-UX, after being sure to install the RAID-01 software bundle.

You can get the software from software.hp.com if you don't have it. Search for A7143A.

The complete instructions are in the A7143A Support Guide at http://docs.hp.com/hpux/pdf/J6369-90001.pdf