HPE Community
Disk Enclosures
1752790 Members
6962 Online
108789 Solutions
New Discussion

Rack Storage 12 with Ms. Clustering

 
Sritharan
Valued Contributor

‎06-14-2003 03:45 AM

‎06-14-2003 03:45 AM

Rack Storage 12 with Ms. Clustering

Hi,

OS -W2K Adv Server

We have on RS/12 with two scsi adapters and it connected to two servers.Each server have one HP Netraid 1M card.
We wanted to create a shared disk in RS/12 for clustering, I have set the dip swtch for custering configuration.

The problem I'm facing right now is, whenever I try to bring up the second server, the server hang at the BIOS..it stated there

Initilaizing SCSI driver [Chip 0:Done].

What I can do to overcome this problem ??

Thanks in Advance
Sri

Known is a drop...unknown is an ocean -> quote from a movie
0 Kudos
Reply
1 REPLY 1
Marino Meloni_1
Honored Contributor

‎06-15-2003 11:23 AM

‎06-15-2003 11:23 AM

Re: Rack Storage 12 with Ms. Clustering

hi,
check the scsi HBA address,
one controller have to be set to id7 (default)
the second HBA have to be set to id6

settings are made in CtrlM in the bios of the Netraid Controller under scsi contrller
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.