Raid 1+0 creation in VA7100

[nasimuddin ansari]

We have 04 Hard Disk in our VA7100 Stoare.
We want to create 1+0 RAID (without any host spare).
Can anyone guide me what command i have to issue on storage serial console. Somethiong like
READY> mgr -v .....
Please help.
(We are not able to configure using Command View SDM GUI interface, so we have to do it on CLI)
Any url that can guide us step-by-step.

[Sameer_Nirmal]

The operating RAID level of VA could be changed usinf VFP command
# mgr -B raid1 ( reset thereafter )

Refer the attached document for VFP commands summary. Refer the VA installation guide as well if you have one.

[Adisuria Wangsadinata_1]

Hi Nasimuddin Ansari,

Good day to you !
Please check the url below :
http://h20000.www2.hp.com/bc/docs/support/SupportManual/lpg28975/lpg28975.pdf

For manuals of VA7100 :
http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?contentType=SupportManual〈=en&cc=us&docIndexId=179111&taskId=101&prodTypeId=12169&prodSeriesId=33737

Hope this information can help you.

Cheers,
AW

[nasimuddin ansari]

We have formated the controller. Created fresh LUNs and restored data.
Thanks to all of you

[nasimuddin ansari]

thanks to all responders.