Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

Raid Manager level

SOLVED
Go to solution
pgorn
Frequent Advisor

Raid Manager level

Can anybody help with the command to find out what Raid manager rev I am running on my Super Dome with XP Array.
Thank you,
11 REPLIES
Torsten.
Acclaimed Contributor

Re: Raid Manager level

I can't get your question.

There are volume managers, hardware RAIDs with management software and some more.

In your case (XP array), you asking about command view software?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
pgorn
Frequent Advisor

Re: Raid Manager level

raid manager rev level that I am on
Nigel Poulton
Respected Contributor

Re: Raid Manager level

Hi pqorn

Have you tried the raidqry -h command?

Mackem
Talk about the XP and EVA @ http://blog.nigelpoulton.com
David de Beer
Valued Contributor
Solution

Re: Raid Manager level

/opt/HORCM/usr/bin/raidscan -h
/opt/HORCM/usr/bin/pairdisplay -h

The latest we have is 01.17.04

If you have a newer version, let me know!

David.
Torsten.
Acclaimed Contributor

Re: Raid Manager level

Now I got it too. Raid manager - of course, sorry.
There is a version 01.19.03.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
pgorn
Frequent Advisor

Re: Raid Manager level

None of those commands have worked. Anything else to try.
David de Beer
Valued Contributor

Re: Raid Manager level

What do you mean none of those commands have worked? What message did you get?

Are you sure you have RAIDManager installed?

What does ll /opt/HORCM/bin/ give you?

David.
Nigel Poulton
Respected Contributor

Re: Raid Manager level

Hi,

Im also a little confused that these commands are not working. Essentially most RAID Manager commands have a -h option which will give you the version of RAID Manager that you are "running".

If you do have RM installed it might also be worth while making sure that your horcm daemons are running.

Mackem
Talk about the XP and EVA @ http://blog.nigelpoulton.com
David de Beer
Valued Contributor

Re: Raid Manager level

Apology, that should read:

"What does ll /opt/HORCM/usr/bin/ give you?"
NOT
"What does ll /opt/HORCM/bin/ give you?"

Regards,
David.
pgorn
Frequent Advisor

Re: Raid Manager level

I found it anc thank you for all of your help
Torsten.
Acclaimed Contributor

Re: Raid Manager level

I was a little confused while sending my first answer, but anyway - it would be helpful to all others who read this thread to post your solution (not just "found it").

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!