Storage Boards Cleanup
To make it easier to find information about HPE Storage products and solutions, we are doing spring cleaning. This includes consolidation of some older boards, and a simpler structure that more accurately reflects how people use HPE Storage.
Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

Rebuild RAID 5

Ayman Altounji
Valued Contributor

Rebuild RAID 5

I have a Compaq ProLiant ML350RG2 with three 18.2GB pluggable Wide Ultra3 hard drives. RAID-5 is formed among three hard drives using smart array 532 controller. The server is running Windows 2000 server.

If I add one more Hard drive to the existing RAID 5 system, do I need to re-install all software?
1 REPLY
Mark Cloutier
Respected Contributor

Re: Rebuild RAID 5

No you do not. Please make sure that Dynamic Disks are enabled. Then you can expand your existing array. If it is not then you cannot do what you ask. I have attached a document which will show you what to expect. This is for NT but it is pretty much the same.
We are here for a good time, not a long time!