Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

Redhat 5.1 ACU Issue

ClaudioD'Anduono
Occasional Advisor

Redhat 5.1 ACU Issue

Hi there,
I have an issue with ACU in management page; it doesn't work; it works via CLI but it sees only 1 controller

System is a proliant dl380g5 with 2 HBAs EMULEX FC2142SR 4GB PCI-e and an MSA1000.

Customer would like configure array via a GUI and so I have to solve problem.

Thank in advance
1 REPLY
ClaudioD'Anduono
Occasional Advisor

Re: Redhat 5.1 ACU Issue

Ok, I solved the problem.
It was a library that is not installed by default on RH5.1

I post it so that someone else doesn't drive crazy.

libnl-1.0-0.10.pre5.4.i386.rpm

You can find it on installation dvd media or on first cd media.

Bye all

Claudio