Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

Relocate disks from S2P controller to S2DH controller

Ayman Altounji
Valued Contributor

Relocate disks from S2P controller to S2DH controller

I have 2 ProLiant servers, one with Smart-2/P controller, one with Smart-2/DH controller. Can I move the disks (NetWare 4.11 was installed) from the S2P server to the S2DH server without any configuration and data loss?
1 REPLY
Ayman Altounji
Valued Contributor

Re: Relocate disks from S2P controller to S2DH controller

This should work. Just do not sop the order of the disks while moving them. If it does not boot, run the F10 setup and check that the RAID controller is set as the boot controller. I have successfully moved a RAID5 set of 4 disks from a 2DH to an RA4000 with no data loss.