Storage Boards Cleanup
To make it easier to find information about HPE Storage products and solutions, we are doing spring cleaning. This includes consolidation of some older boards, and a simpler structure that more accurately reflects how people use HPE Storage.
Disk Arrays
Showing results for 
Search instead for 
Did you mean: 

Remote Access to HSG80 Controller

Ayman Altounji
Valued Contributor

Remote Access to HSG80 Controller

I'm not sure if this is being posted in the appropriate Forum, my apologies..

In our environment we have 2 MA-8000 storage systems. They contain HSG80 Array Controllers using ACS Version 8.5

We are attempting to set up our systems such that we can execute CLI commands against the controllers remotely. i.e. not using the SWCC or the serial port connection. The Compaq StorageWorks HSG80 Array Controller CLI reference manual indicates that there is a third option. In the first couple of pages of chapter 1, there is a reference to 'A remote connection by way of the host system terminal' and 'Using the DUP utility from the system terminal you may also enable a remote connection to the controller.'

Is there any additional information on this particular scenario? I am unable to find anything on the Compaq web site so far. Any ideas would be appreciated. Thanks - Ron Davis
Ayman Altounji
Valued Contributor

Re: Remote Access to HSG80 Controller

Update to my question... We will persue obtaining the Command Scripter utility.