Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

Reset to device, \Device\RaidPort0, was issued.

Petie
Occasional Contributor

Reset to device, \Device\RaidPort0, was issued.

I have a server DL 585 G1 that has Reset to device, \Device\RaidPort0, was issued .id 129 errors in the event logs but when I reboot they system as it boots and detects the controllers It hangs on "Slot 2 HP Smart Array" 1 Logical Drive 1775 - Slot 2 Drive Array - Storage Enclosure Not responding. SCSI port 1: Check storage enclosure power and cables. I am remote but I have confirmed the power is not an issue and all the drives are up. Is there anyway to test the cable or the drives? The local storage runs of the same controller so I am don't think it is the controller.
1 REPLY
Jan Soska
Honored Contributor

Re: Reset to device, \Device\RaidPort0, was issued.

Hello, this looks like HDD failure - I sagust replace drive, it is very unprobable to be a cabling problem.

Jan