cancel
Showing results for 
Search instead for 
Did you mean: 

SC10

SOLVED
Go to solution
balaji_vvv
Frequent Advisor

SC10

We have SC10 which is currently having 6 disks/striped. I want to reconfigure this to lvm disk mirroring. Can anyone let me know what needs to be changed on the SC10 hardware level?
I know software level I can use lvm for mirroring.

Currently SC10 connects to an 11.23 server with 2 scsi HBA's and I’m seeing dual path for each disk.
Can I do mirroring with full bus or it’s only possible with split bus? How to enable split bus? I'm not worry about the current data it’s a fresh install but it will be semi production.
I need to see c2t0d0..c2t1d0..c2t2d0.. mirrored with c3t0d0..c3t1d0..c3t2d0 (just an eg.)

 

 

P.S. This thread has been moved from Disk to Disk arrays. - Hp forum moderator

2 REPLIES
balaji_vvv
Frequent Advisor

Re: SC10

Also do i need to relocate my disk? Currently its all sitting in slot0, slot1,...slot5 (6 disks)?
Torsten.
Acclaimed Contributor
Solution

Re: SC10

The SC10 is just a disk chassis, so you need to use either LVM mirroring or hardware RAID.

I would use "split bus" for LVM mirroring, mirror from one bus to another. Just set the dip switch to split bus on both controllers while the chassis is powered off.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!