HPE Community
Disk Enclosures
1751693 Members
4948 Online
108781 Solutions
New Discussion юеВ

Re: SCSI ID changed for drive - Smart Array 641

 
Greg Hampton
Occasional Contributor

тАО12-24-2008 04:49 AM

тАО12-24-2008 04:49 AM

SCSI ID changed for drive - Smart Array 641

Have a RAID 5 with a spare setup on controller above. One of the drives failed. The spare became active. Put a new drive in, the drive was assigned a different SCSI Id (5) from the failed drive (12). The new drive shows up as unassigned. Is there a way to manually assign the SCSI ID? I don't understand why it was assigned a different SCSI ID.
0 Kudos
Reply
2 REPLIES 2
B.K
Advisor

тАО12-24-2008 07:51 PM

тАО12-24-2008 07:51 PM

Re: SCSI ID changed for drive - Smart Array 641

Could you please tell me what is the firmware revision of the controller. It is know issue with one of the firmware. And there is no manual way to assign the scsi id to the disk.
0 Kudos
Reply
Greg Hampton
Occasional Contributor

тАО12-26-2008 08:16 AM

тАО12-26-2008 08:16 AM

Re: SCSI ID changed for drive - Smart Array 641

Thanks for the reply...

The fw for the controller is 2.84
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.