Storage Boards Cleanup
To make it easier to find information about HPE Storage products and solutions, we are doing spring cleaning. This includes consolidation of some older boards, and a simpler structure that more accurately reflects how people use HPE Storage.
Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

SMART - 2DH Controller won't Rebuild Drive

Mike Squatrito
Occasional Contributor

SMART - 2DH Controller won't Rebuild Drive

Hi, I have a Compaq Proliant 1600 running MS Windows NT 4.0 Server SP6. I have three drives configured with distributed data guarding. I replaced a failed drive with an equivalent drive and the system justs shows the status as "Ready for Rebuild". Does anyone know how to get the system to start the rebuild. I tried everything I can think of.
Thanks
1 REPLY
e4services
Honored Contributor

Re: SMART - 2DH Controller won't Rebuild Drive

It would seem that sutomatic Rebuild is not enabled. You will have to run the configuration software to start the rebuild. You can download it from HP Support if you do not have a CD
Hot Swap Hard Drives