Storage Boards Cleanup
To make it easier to find information about HPE Storage products and solutions, we are doing spring cleaning. This includes consolidation of some older boards, and a simpler structure that more accurately reflects how people use HPE Storage.
Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

SNMP Monitoring NETRAID-1M

Tony Dawson
Occasional Visitor

SNMP Monitoring NETRAID-1M

I have a TC4100 server with a NETRAID-1M card in it. I want to monitor the card and arrays health status using SNMP. Does anyone know what I need to install and which MIB and OID's I will need to look at.
Thanks
2 REPLIES
kris rombauts
Honored Contributor

Re: SNMP Monitoring NETRAID-1M

Tony,

install the Netserver management agents package V5.55 available here (assuming you run Win2000).

http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?locale=en_US&pnameOID=19837&taskId=135&prodTypeId=15351&prodSeriesId=50440〈=en&cc=us&swEnvOID=226#1121

I think the package includes the MIB

The Netraid cards also have their config utility and monitor service perform a by default weekly consistency check on the raid set and also log errors into the System eventlog of Windows, it can be downloaded here:

http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?pnameOID=51917&locale=en_US&taskId=135&prodSeriesId=51915&prodTypeId=329290&swEnvOID=226

Highly advised to install the monitor service also.


HTH

Kris
Tony Dawson
Occasional Visitor

Re: SNMP Monitoring NETRAID-1M

Many thanks kris. I will check it all out.