Storage Boards Cleanup
To make it easier to find information about HPE Storage products and solutions, we are doing spring cleaning. This includes consolidation of some older boards, and a simpler structure that more accurately reflects how people use HPE Storage.
Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

SNMP hp commandview sdm subagent failed to start.

kumasudh
Advisor

SNMP hp commandview sdm subagent failed to start.

Hello Experts,

I am facing problem with commandview subagent. The agent fails to start when i stop/start the SNMP Master agent. It fails with the following error msg.

Starting the SNMP hp commandview sdm subagent
EXIT CODE: 1
ERROR: FAILED TO START SUBAGENT

Then i tried to start the agent manually by executing:

# /sbin/init.d/SnmpCmdVw start

EXIT CODE: 1

In the snmpd.log file, I could see only one error msg.

"AgentSocketPullInput: short read pending on socket close, data discarded

at line 491 in file ../common.c
".

Finally i rebooted the system and agent came up automatically.

Could you please help me troubleshooting this problem as rebooting the production server is not prefered option.

here is the HP-UX s/w level on the system

HPUX11i-OE-Ent B.11.11.0312 HP-UX Enterprise Operating Environment Component
HPUXBase64 B.11.11 HP-UX 64-bit Base OS
HPUXBaseAux B.11.11.0312 HP-UX Base OS Auxiliary
HWEnable11i B.11.11.0312.4 Hardware Enablement Patches for HP-UX 11i v1, December 2003
CMDVIEWSDM A.1.06.00 hp StorageWorks Command View SDM



3 REPLIES
Torsten.
Acclaimed Contributor

Re: SNMP hp commandview sdm subagent failed to start.

I would use a newer version first (A.1.09.02).

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
kumasudh
Advisor

Re: SNMP hp commandview sdm subagent failed to start.

Hi Torsten,

Thanks a lot for you reply. It would not be possible to suggest to upgrade the CMDVIEWSDM version from A.1.06.00 to A.1.09.00 untill n unless we have concerete information about the problem in that version. It will be great if you can tell me which all configuration files are there for cmdvwagt process and which is the configuration file SNMP master deamon refers before starting the SNMP hp commandview sdm subagent ?

Thanks,
Best Regards
Sudhir
Torsten.
Acclaimed Contributor

Re: SNMP hp commandview sdm subagent failed to start.

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=30591&prodTypeId=18964&prodSeriesId=64112&swLang=13&taskId=135&swEnvOID=2080

Follow the notes! Check (java) patches!

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!