Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

STOP 0x0000007B

Ayman Altounji
Valued Contributor

STOP 0x0000007B

After installing a Smart Array 431 in a ML370 and doing a restore from same server in a fresh NT installation (using Smart Start) a get a blue screen with a STOP 0x0000007B (Inaccessible_boot_device) error. How can I recover from this? The server doesn't boot.
2 REPLIES
Ayman Altounji
Valued Contributor

Re: STOP 0x0000007B

You might want to check the boot order in CMOS ( setup )
Ayman Altounji
Valued Contributor

Re: STOP 0x0000007B

Make certain the Smart 431 is listed as " Controller Order First " in the System Configuration Utility .