HPE Community
Disk Enclosures
1752661 Members
6125 Online
108788 Solutions
New Discussion

SW4354 -> SA642 -> DL560

 
Janaka_2
Occasional Contributor

‎07-23-2003 08:14 AM

‎07-23-2003 08:14 AM

SW4354 -> SA642 -> DL560

Hi,
Have a SW4354 connected to a DL560 (Win server 2003 Standard) via SA642 controllers.

The SW4354 (Ultra3 I/O module) have U320 15K drives in it as a 3 disk raid 5 and 2 disk raid 1 on each bus.

Each bus is connected to a SA642 card.

Also there are 2 U320 15K drives (raid 1) connected to one of the SA642 internally.

The array config utility picks up the internal drives as U320 but show all the drives in the SW4354 as Ultra2 (although they should show as U320 as well)

Does anybody have any idea why this would be so?
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.